(as of Sep 17,2021 00:22:14 UTC – Details)
Top Stainless Steel band
Fit watch type:
Fit iWatch SE,Series 6,Series 5,Series 4, Series 3,Series 2,Series 1,Sport, Edition very well.
Perfect Fit 5.3 -8.5 inches (135mm – 215mm) wrists.
What you will get in the box:
1 X Top Stainless Steel band
A TPU scratch-resistant flexible case for iWatch Series 5&4&3&2&1 to protect your watch from damage
A small tool for removing the strap link
How to remove the links of the strap:
Please make sure to insert the screw from the arrowed side.
1. Place the strap on the tool, aligning the screw tip of the tool with the pin hole on the side of the strap.
2. Gently rotate the screw of the tool until the pin of the strap is pushed out. Then unscrew the screw of the tool in the opposite direction to release the strap.
3. Remove the pin.
4. Repeat the previous steps.
5. Arrange the watch band and the links on the table top, pierce the pin gently into the hole of the links, and make sure the correct end (The Round End) is inserted into the link holes.
6. Insert most of the pin to ensure that the link does not fall off.
7. Place the end of the pin on a hard surface or tool. Then press vertically.
If you encounter any problems related to our strap, please let us know and we will do our best to solve it for you. If you are looking for more high-quality straps, please search for Bestig on Amazon or click the blue Bestig font under the product title to visit our store.
[FIT SIZE] Please select the same size as the back of your watch dial shows. Fit wrists of 5.3 -8.5 inches (135mm – 215mm), 8 links can be removed. The length of iwatch 42mm/44mm band can be adjusted by removal tool.
[PREMIUM MATERIAL] Crafted from top stainless steel with a smooth surface, which enhances the comfort and durability of the watch band . It will be comfortable touch feeling on your wrist without hurting your skin, handsome and practical, wear-resisting, high hardness and corrosion resisting.
[ONE-PRESS INSTALLATION AND ONE-CLICK RELEASE] First slide the two ends of the strap into the watch, and then use two fingers to press the buttons on both sides of the strap lock to open the strap, wear it on the wrist and press the surface of the lock. Then the watch is fixed on the wrist. When you need to release the watch from your wrist, just press the buttons on both sides of the lock as above.
[NOTE] The Upgraded adapter is not connected to the strap with screws but join in the strap become a whole, which is more sturdy and there is no need to worry about the adapter being damaged or falling. If you encounter any problems, please let us know and we will do our best to solve it for you.